hydraulic hole Punch Tool (CH-60)

Features:

Punching the different kind of metal sheet up to 10mm.
It can match hand pump CP-700 or electric pump
High- strength return spring for rapid cylinder retraction
High- hardness of material for rapid cylinder retraction
Half- opened casting body, widely use in different areas.

It used for Cu/Al plate
Max thickness of sheet: 10mm
Punching force: 30T/300KN
Stroke: 25mm
Depth of throat: 70mm
Height: Approx. 350mm
Weight: Approx. 16.9kg
Accessories
Mould disposition: 3/8(Φ 10.5mm); 1/2(Φ 13.8mm); 5/8(Φ 17mm); 3/4(Φ 20.5mm)


We produce most components by ourselves, it is started from cutting raw
Material, machining roughly in the first step. Casting, forging, punching, heat
Treatment, finish machining, painting, assembling and finally packing, we will
Spot check for each steps.

We meet your requirements backed by our 300 strong highly trained team. Every year, we train our workers quality our team to apply high skills to service you. Now, we have two main types of tools, they are electrician tools and plumbing tools. We will attend different exhibitions every year, such as Canton Fair( twice per year). Kolon Fair in Germany. ISH in Frankfurt, Crocus EXPO IEC in Russia and etc. So we can communicate with you face to face by these exhibitions. We are looking forward to a futher trustful and successful cooperation.


If you want to know more information about our products welcome to contact

Us at any time, and welcome to our company!