Mechanical Maintenance of common sense:

1. Gasoline prohibit speeding and should be shut down at low speeds.

2, the oil to the right, genuine, clean gasoline to clean, fresh.
3, non-professionals can not adjust the carburetor. We must adjust, generally

After the needle gently clockwise to tighten, then counterclockwise twist 1.5-1.75 weeks.
4, the air filter should always check with soapy water or regularly

Replace.
5, 100-300 hours of operation of the gasoline engine, the application of wood or bamboo Clear

Coke once. Remove the cylinder head when cleared, remove the cylinder, cylinder head, live

Plugs, valves, etc. attached to carbon. Coke not enter the bore and the valve

Seat.
6, to maintain clean cylinder gasoline engine especially fins.
7, refueling, inspection, repair, maintenance, you should disconnect the spark plug cap, not

To smoke, away from open flame.
8, not in the operating room. In addition to the operator when the machine is working outside, unrelated persons

Leave the machine more than 15 meters.
9, before and after each use machine inspection section and other parts of the bolt

Tightness.
10, there is a clutch, the clutch that is exposed installation of the machine is not good

Before the gasoline engine may not start.

11, other lubricating parts of the machine, follow the instructions to add regularly needed

NOTE lubricating oil or grease.


Mechanical Maintenance of common sense:

1. Gasoline prohibit speeding and should be shut down at low speeds.

2, the oil to the right, genuine, clean gasoline to clean, fresh.
3, non-professionals can not adjust the carburetor. We must adjust, generally

After the needle gently clockwise to tighten, then counterclockwise twist 1.5-1.75 weeks.
4, the air filter should always check with soapy water or regularly

Replace.
5, 100-300 hours of operation of the gasoline engine, the application of wood or bamboo Clear

Coke once. Remove the cylinder head when cleared, remove the cylinder, cylinder head, live

Plugs, valves, etc. attached to carbon. Coke not enter the bore and the valve

Seat.
6, to maintain clean cylinder gasoline engine especially fins.
7, refueling, inspection, repair, maintenance, you should disconnect the spark plug cap, not

To smoke, away from open flame.
8, not in the operating room. In addition to the operator when the machine is working outside, unrelated persons

Leave the machine more than 15 meters.
9, before and after each use machine inspection section and other parts of the bolt

Tightness.
10, there is a clutch, the clutch that is exposed installation of the machine is not good

Before the gasoline engine may not start.

11, other lubricating parts of the machine, follow the instructions to add regularly needed

NOTE lubricating oil or grease.


Mechanical Maintenance of common sense:

1. Gasoline prohibit speeding and should be shut down at low speeds.

2, the oil to the right, genuine, clean gasoline to clean, fresh.
3, non-professionals can not adjust the carburetor. We must adjust, generally

After the needle gently clockwise to tighten, then counterclockwise twist 1.5-1.75 weeks.
4, the air filter should always check with soapy water or regularly

Replace.
5, 100-300 hours of operation of the gasoline engine, the application of wood or bamboo Clear

Coke once. Remove the cylinder head when cleared, remove the cylinder, cylinder head, live

Plugs, valves, etc. attached to carbon. Coke not enter the bore and the valve

Seat.
6, to maintain clean cylinder gasoline engine especially fins.
7, refueling, inspection, repair, maintenance, you should disconnect the spark plug cap, not

To smoke, away from open flame.
8, not in the operating room. In addition to the operator when the machine is working outside, unrelated persons

Leave the machine more than 15 meters.
9, before and after each use machine inspection section and other parts of the bolt

Tightness.
10, there is a clutch, the clutch that is exposed installation of the machine is not good

Before the gasoline engine may not start.

11, other lubricating parts of the machine, follow the instructions to add regularly needed

NOTE lubricating oil or grease.




The related production